LEGO Star Wars UCS Millennium Falcon (75192) Official Reveal

Just now, the first official images of the new Ultimate Collector’s Series Millennium Falcon were unveiled, after multiple teases of the set from LEGO’s social media platforms (and a few leaked images). The set shall be available to VIPs in mid-September and will get a wide release on the 1st of October. It will be on display in LEGO Stores beginning tomorrow (1st September) in conjunction with Force Friday II.

LEGO Star Wars Millennium Falcon, 7541 pieces.

US $799.99, CA $899.99, DE €799.99, UK £649.99, DKK 6999.00

Available from the 1st of October with VIP early access from the 14th of September.

Welcome to the largest, most detailed LEGO Star Wars Millennium Falcon model we’ve ever created – in fact, with over 7,500 pieces it is the biggest LEGO model ever sold! This amazing LEGO interpretation of Han Solo’s unforgettable Corellian freighter has all the details that Star Wars fans of any age could wish for, including intricate exterior detailing, upper and lower quad laser cannons, landing legs, lowering boarding ramp and a 4-minifigure cockpit with detachable canopy. Remove individual hull plates to reveal the highly detailed main hold, rear compartment and gunnery station. This amazing model also features interchangeable sensor dishes and crew, so you decide whether to play out classic LEGO Star Wars adventures with Han, Leia, Chewbacca and C-3PO, or enter the world of Episode VII and VIII with older Han, Rey, Finn and BB-8!

Includes 4 classic crew minifigures: Han Solo, Chewbacca, Princess Leia and C-3PO.

Also includes 3 Episode VII/VIII crew minifigures: Older Han Solo, Rey and Finn.

Figures include a BB-8 droid, 2 buildable Porgs and a buildable Mynock.

Exterior features include intricately detailed and removable hull panels, a lowering boarding ramp, concealed blaster cannon, 4-minifigure cockpit with detachable canopy, interchangeable round/rectangular sensor dishes, upper and lower quad laser cannons, and 7 landing legs.

Main hold features a seating area, Dejarik holographic game, combat remote training helmet, engineering station with turning minifigure seat and a doorway build with passageway decoration.

Rear compartment features the engine room with hyperdrive and console, 2 doorways, hidden floor compartment, 2 escape pod hatches, engineering console and an access ladder to the gunnery station.

Gunnery station features a minifigure gunner’s seat and detachable hull panel with fully rotating quad laser cannon. An additional quad laser cannon is also mounted on the underside.

Also includes an informational fact plaque.

Features a new cockpit canopy element.

Classic crew weapons include Han’s blaster pistol and Chewbacca’s stud-firing bowcaster.

Episode VII/VIII crew weapons include Han’s blaster, Rey’s small silver blaster and Finn’s medium blaster rifle.

Change out the features and crew characters to switch between classic and Episode VII/VIII versions of the Millennium Falcon!

Open individual hull panels to access the detailed interior while retaining the overall exterior appearance.

Slide the panel to reveal the concealed blaster cannon.

Turn classic Leia’s and Han’s head to reveal their breathing mask decoration.

Makes the perfect intergalactic toy or flagship display model.

Measures over 8” (21cm) high, 33” (84cm) long and 22” (56cm) wide.


LEGO Ideas NASA Apollo Saturn V (21309) To Be Discontinued?

The highly prized LEGO Ideas NASA  Apollo Saturn V (21309) may probably still sit on the top of our must-have LEGO sets of the year, but unfortunately, in spite of the relative early shelf life of this set since its release last June, the availability of the Apollo Saturn V (21309) has been notoriously close to none. True, we have the reassuring words from the LEGO Ideas Team that the set will not be retired right away given that it has only been three months in circulation since its release on June 1st. There were also moments when the NASA Apollo Saturn V set has been available at LEGO shop@home on very seldom occasions. However, the obvious unavailability of the set for weeks has cast a shadow of a doubt on the truth behind the availability of this highly sought after set.

LEGO Ideas NASA Apollo Saturn V (21309)

For weeks already, shop.LEGO.com has always returned a ‘Temporarily Out of Stock’ message each time a query has been made for this set. Similarly, LEGO Brand and Certified stores have been informing customers about the indefinite date of 21309’s arrival in their respective stores. In search for answers, our friends from Promo Bricks decided to dig deeper and was able to have a privileged conversation with an undisclosed LEGO Product Manager. This may sound very, very sad, but according to Promo Bricks, the said manager has revealed that LEGO no longer has plans of producing the highly prized set. In other words, they are now in the process of delivering and selling the last copies of 21309 that went into production.

LEGO Ideas NASA Apollo Saturn V (21309)

From the LEGO Group’s business perspective, this somehow makes sense, especially considering what a LEGO Customer Service Rep told Promo Bricks. According to the said LEGO CSR, even before a set is released for sale, there is already a pre-determined number of copies that each set is expected to have. This number is not usually revealed to the public, and the sets are produced in batches. When the demand exceeds the pre-determined supply eventually, then better expect delivery delays and ultimately the set’s cancellation. Furthermore, given the long lead-times needed to produce such great sets like the LEGO Ideas NASA Apollo Saturn V (21309), it is very impractical to produce more sets just for a short-term supply. Simply put, the NASA Apollo Saturn V (21309) set is hugely popular and a solid success that LEGO could no longer supply the growing demand.

But then again, these are just assumptions that we have based on currently available information. Perhaps LEGO will still reconsider and we will still get to see this gorgeous set once again on store shelves. Let’s just hope for the best.

What are your thoughts about this brick fans? Let me know in the comments.

More LEGO Star Wars 2018 Reveals

While most of the LEGO Star Wars faithful has now fixed their gaze on the grandest reveal that LEGO has slated this Force Friday II, it seems that we can expect more LEGO Star Wars 2018 sets to be unveiled towards the end of the year and even until the first quarter.

Our brick intel (courtesy once more of RebelScum) suggests that we’ll be seeing more battle packs, a new wave of microfighters, and another Ultimate Collectors Series in the works. Here’s a breakdown of what we know regarding their set numbers, titles, and brief descriptions whenever they’re available. If you’re looking for watermarked images, I trust that you’ll know your way around. Some of these names are not final and may be changed anytime at LEGO’s discretion.

Sets and Minifigures

Tatooine Battle Pack (75198)

LEGO Star Wars 2018

Features a small tracked utility sled. Minifigures include two Jawas, a Tusken Raider and a blue-topped astromech apparently suspended on the utility sled.

Jedi and Clone Troopers Battle Pack (75206)

LEGO Star Wars 2018

Includes a mini version of the Republic Dropship with two Clone Troopers, Coleman Trebor and Ki-Adi-Mundi minifigures.

General Grievous’s Combat Speeder (75199)

LEGO Star Wars 2018

Coming straight from the Clone Wars, this set includes a repulsorcraft with a pair of spring-loaded shooters and a movable column that serves as a steering mechanism as well. Minifigures include Mace Windu and General Grievous.

Yoda’s Hut (75208)

LEGO Star Wars 2018

The set consists of the iconic retirement home of Yoda at the planet of Dagobah. It consists of a brick-built hut with some plant and foliage elements. Included are the minifigures of Yoda, Luke Skywalker and R2-D2. Yoda may also be placed on Luke’s back via another minifig accessory to recreate the latter’s Jedi training as seen in the Empire Strikes Back.

There’s also a next wave of The Last Jedi sets placed in four generic grey boxes all numbered 75197, 75200, 75201 and 75202 respectively. Rumor has it that one of these sets will include Rey’s training in planet Ahch-To, which means we’ll get to see the highly sought after Old Man Luke in his minifigure form.

MicroFighters

Millennium Falcon (75193) – with Chewbacca minifigure.
First Order TIE Fighter (75194) – with Special Forces TIE Fighter Pilot minifigure.
MicroFighters (75195) – unknown set and minifigure.
MicroFighters (75196) – unknown set and minifigure.

Buildable Figures

Boba Fett (75533)
Darth Vader (75534) – with removable helmet
Darth Maul (75537)

Other than Darth Vader who already has a buildable figure of his own in 2015’s LEGO Star Wars Darth Vader (75111), it is a first for Boba Fett and Darth Maul to have ultrabuilds of their own. There are two more buildable figures (75535 and 75536) whose boxes have been blacked out, but our info suggests that these may be tied up with the Han Solo anthology, similar to what LEGO did when it introduced several Rogue One characters in their buildable figure versions.

As a last note, there are also rumors that may suggest that another LEGO Star Wars UCS is currently in the works, with all the signs pointing on what could be a remake of 2004’s Y-Wing Attack Starfighter (10134). If this is the case, then we can certainly see this UCS set probably released during the first half of 2018.

First Catalog Images of the LEGO Star Wars UCS Millennium Falcon (75192).

LEGO has finally released yesterday its presumably last teaser of the largest LEGO set ever, and we can somehow expect that within the next hours leading to the big reveal on September 1, we will be able to see plenty of sightings of this elusive LEGO UCS set. More information (aka leaks) are now slowly trickling its way via social media, and just a few moments ago, RebelScum stumbled upon some images from a particular Italian LEGO Catalog that clearly shows how the box of the LEGO Star Wars UCS Millennium Falcon (75192) actually looks like. These images were first shared by Windyjago over at Twitter, which you can see below.

//platform.twitter.com/widgets.js

Here’s a closer look at the images.

I guess these first images of the MF will finally put all doubts aside, that this next UCS is indeed the remake of the Falcon. We’re not sure if LEGO’s men-in-black enforcers will soon be standing on our doorsteps, demanding to take this article down, but as far as we are concerned these first images seem to have come from a legitimate LEGO Store catalog, as mentioned by Windyjago. If you will notice closely on the right side of the box, you will see the earlier leaked, Chinese version of the MF’s promotional poster/flyer showing the fine details of the set.

As a final note, other than seeing the set’s official images, I am very much interested on the description written on the side of the box. It will probably give us some idea (like they always do in certain commemorative sets) on what motivated LEGO to come up with another re-release, just as this.

The wait is simply killing me…

 

Ever Wished For A LEGO-Nintendo Team Up? Help Us Start With This LEGO Ideas Zelda: Breath of the Wild Guardian and Link Minifigure.

If you liked Tyler’s LEGO Yoshi MOC, then probably you’ll be interested to find out that this is not the first time that our resident Master Builder dived into creating a Nintendo-themed set. Last month, we were fortunate enough to have our very first LEGO Ideas submission approved for posting by the LEGO Ideas Team. If you’ve been following my posts regarding several LEGO Ideas projects, you probably know already that LEGO Ideas has revised their fan submission guidelines which state that projects based on currently active licenses and restricted IPs will no longer be accepted. As stringent as the rules may be, it did not deter our Brick Show team to still give it a shot knowing how much we love to see a LEGO and Nintendo collaboration later on in the future.

So to start our LEGO Ideas adventure, Tyler sets off to recreate one of the most recent Nintendo hits released for the Switch – The LEGO Ideas Legend of Zelda: Breath of the Wild Guardian with Link Minifigure!

Here’s a brief description about this project, and Tyler’s take on this excellent MOC.

 

Zelda: Breath of the Wild Guardian and Link Minifigure

About This Project:

Now you can battle against ancient mechanical robots in LEGO form. Guardians roam the peaks and valleys of Hyrule, and it’s your job to destroy them! Using Link’s bow and arrow, take them down in this epic, original creation by Tyler Clites.

This project comes from a passion for Nintendo consisting of a lifetime worth of gaming memories, and a deep understanding that we need to make Nintendo LEGO sets happen. Seeing The Legend of Zelda come to brick form is something I’ve wanted since I was a child, and hopefully this is one step closer to that dream.

By far, Tyler’s version of this ancient mechanical robot is the closest representation of the Guardian in its LEGO brick form. I like how Tyler was able to capture those organic shapes, and other minute details of the Guardian. One example is his use of new, gold tentacle pieces which first appeared in several LEGO Elves sets. He also included several circular 1×1 plates with holes, and chain pieces to add a more golden accent into this build.

Though there are quite limited play features on this LEGO Ideas set, Tyler was able to work around this limitation by adding several flexible legs (all six of them), a head that spins around, and a spring loaded shooter. The legs are articulated using a lot of click joints, which allows this brick-built Guardian to be posed in many ways.

One fun feature that Tyler added to this LEGO Ideas Guardian is that the articulated legs can be removed from the main body, similar to how you systematically defeat these six-legged machineries in the video game. These legs can be ‘broken off’, and when the Guardian is eventually defeated, you can dismantle the entire robotic combatant and leave a rubble of ancient screws, springs, and cogs.

As a bonus, Tyler managed to come up with a customized digital version of Link to go along with the Guardian. The Link minifigure comes in his trademark blue garb, and choice of weapons. It also features a unique hairpiece, nicely detailed body straps on the torso, and double molded legs.

Again, if you wish to see this become an official LEGO Legend of Zelda set, remember to support this project over at LEGO Ideas. You can join us in this journey by voting for this project and helping us reach that much desired 10K landmark. Just click on the support button and hopefully, will be one step closer in having an actual LEGO Legend of Zelda: Breath of the Wild Guardian.

So what do you think brick fans? Do you have other LOZ BOTW characters that you wish Tyler to build? Let us know in the comments below, or head over to our official social media channels (by clicking on the icons below) and share us your thoughts.

 

Yoshi Gets The LEGO Treatment In Our LEGO Nintendo Yoshi Wish Set MOC.

Talk about Nintendo and dinosaurs and there is only one thing that will immediately pop in every one’s mind – Yoshi! I have to admit, this may be a long overdue project but thankfully, Tyler also shares our same love with the most faved Nintendo dinosaur of all time. Coming in at 247 pieces, Tyler’s next wish set MOC features a fun version of Yoshi complete with an extendable tongue and the iconic green spotted egg. Watch this.

Tyler’s version of Yoshi is really spot-on. Though Tyler would personally prefer a somewhat brighter green color scheme for Yoshi, his use of nice, lime green pieces certainly makes up for that. These lime green pieces are also readily available which means we have a better chance of building one of our own LEGO Yoshi without searching for the necessary pieces far and wide.

As you can see from the video, there is a lot of articulation that goes on with our LEGO Yoshi MOC. His arms have a certain degree of mobility, while his legs, which are mounted on ball joints, are very much posable as well. It’s kind of fun to have Yoshi posed on different angles, whether standing up or sitting down.

LEGO Yoshi’s head is also movable thanks to Tyler’s use of a sturdy Technic ball joint. The mouth may also be opened or closed which, together with Yoshi’s articulated head (or neck, depending on how you look at it) allows a wide range of poses and a certain natural look typical of Yoshi’s character.

Tyler also managed to cleverly recreate Yoshi’s trademark turtle shell at the back of this build by using SNOT (Studs Not On Top) techniques. This is one of the reasons we are so impressed with Tyler’s brick-building skills considering how he comes up with solutions or alternatives for relatively hard-to-find LEGO pieces. He originally thought of using a red-colored, half-dome piece which is quite difficult to find since they only come in certain Atlantis sets. So to make up for this rare piece, Tyler managed to recreate Yoshi’s red turtle shell by substituting certain red colored cheese slopes.

Of course, one of the other things that goes well with Tyler’s Yoshi MOC is the iconic green-spotted egg and his extendable, chameleon like tongue. The egg itself is brick-built, with the same green accents that we see from the video games. An extendable tongue piece may be mounted inside Yoshi’s mouth by removing the red, circular plate which was originally placed inside. The tongue itself may also be moved up and down, striking fear into the heart of any Goomba.

This is one build that will definitely be added to our LEGO Nintendo wish list. Thankfully, for all Nintendo and LEGO fans out there, you may be pleased to know that Tyler has a lot of Nintendo themed builds on the works so be sure to stay tuned in our YouTube channel and here in our blogsite. In the meantime, if you wish to build your very own LEGO Yoshi, just head over to BuildBetterBricks.com and download the instructions. For a small fee (which covers not just the site’s maintenance, but also Tyler’s seemingly endless supply of LEGO bricks), what you’ll receive is a digital pdf copy of how to build Yoshi, a parts list, and a Stud.io file that lets you seamlessly export its parts list to Bricklink. As a final note, if you’re like us who would like to see a possible mash-up between Nintendo and LEGO, then you may want to head over to LEGO Ideas and check out our proposed Ideas set – the LEGO Legend of Zelda: Breath of the Wild Guardian with Link minifigure, courtesy of Tyler of course. I’ll talk more about this outstanding Zelda MOC later on so just stay tuned.

Happy building!

 

A Round Up of Everything We Know So Far About the LEGO Star Wars UCS Millennium Falcon (75192).

https://player.zype.com/embed/59a5dfe9649f0f153b00026e.html?app_key=aknKS-sRR2pKtUI6dVg9DxLWddMD3RnVUMXhGSADiDE0RNNUMzN3NRuPwYN7IUqr&autoplay=false

We’re almost there! In roughly 48 hours, we’ll get to see what is in store in that large, bulky box that LEGO touted as their largest set ever created. For the whole month of August, LEGO was quite deliberate in releasing their scheduled teasers and earlier today, LEGO has revealed their last hint in this series of reveals. Released via their social media channels, LEGO gives fans an idea on how you’ll be able to carry this set if you prefer to purchase this from any LEGO store (that is, if there will be enough sets available for everyone).

//platform.twitter.com/widgets.js

Placed side by side with 2016’s LEGO Star Wars UCS Death Star (75159) which can easily fit inside LEGO’s largest yellow plastic bag, this 4,000-piece set just pales in comparison with the mammoth sized set known to most already as the much rumored LEGO Star Wars UCS Millennium Falcon (75192). It is so huge at approximately 18.7 pounds (or 8.5 kilos) that no LEGO plastic bag can handle the weight. In LEGO’s latest tweet, set 75192 is so large that it will require wheels to be transported out of a LEGO store. Now, the only question is, will they give you a push cart if you have the cash to burn and you eventually decide to purchase two or more sets. Hmmm…

Since this is the very last teaser that we can expect from LEGO before the big, official reveal on Force Friday II, our Brick Show Brian has come up with a roundup of all the things that we know so far (see video above) about LEGO’s ‘worst kept secret in all of LEGO history’. Without a shadow of doubt, there are strong evidences to show that this super secret set is indeed an extremely large remake of the Millennium Falcon, which first appeared as a LEGO Ultimate Collector’s set ten years ago, tagged as the LEGO Star Wars UCS Millennium Falcon (10179).

But perhaps the biggest concern in everyone’s mind at this point has little to do with how we will be able to carry it out from the store, but more of how we can even have access to it in the first place. Will it be a limited series release? Will there be pre-orders? Are there limited quantities? Will LEGO be able to catch up with the demands even before October 1 arrives when the set becomes available to the general public?

These are very real concerns, considering how the LEGO Ideas NASA Apollo Saturn V (21309) set still appears to be Out of Stock at shop.LEGO.com. Moreover, we don’t have any official word yet from LEGO if there will be limited quantities around say 5,000 or so. If that will be the case, then we can definitely expect retailers to run like mad and grab all these ‘gold’ plastics and we may not even see them on store shelves anymore.

We certainly hope that LEGO has a back-up plan of some sorts for this re-release of the UCS Millennium Falcon to ensure that this set will remain in shelves for the next few years. Because even though it has a hefty tag price of around $700 or more and not all people will be able to afford it, the reality is, there are still a good number of people who is willing to spend such an insane amount of money for this extraordinary LEGO set.

So what do you think of all these things, I mean with all the hype surrounding the LEGO Star Wars UCS Millennium Falcon (75192)? Will you even get this set in spite of the outrageous price tag attached to it? Do you want to see Brian give it a spin and review this set? 😉 Let us know what you think in the comments below.

As a last note, you might notice that we’ve added a red, bell icon at the lower right corner of the screen below.

If you wish to stay updated about the latest news, reviews, and other cool LEGO stuff that we post here at BrickShow.com, be sure to click on that button so you can receive instant push notifications right from your PC’s desktop. So stay tuned here at Brick Show for more news and updates, especially that we’re counting the hours before Force Friday II launches this Friday.

Blast Off With Blocks Magazine Issue #35 Featuring the LEGO Ideas NASA Apollo Saturn V and More of LEGO Star Wars.

Blocks Magazine Issue 35 is now available and this month, special attention is given to the highly sought after (and not to mention, elusive) LEGO Ideas NASA Apollo Saturn V (21309) plus several LEGO Star Wars inspiration. In this latest issue, we get a closer look at how LEGO Star Wars designers craft their iconic sets and even get to share some building tips on how to recreate the opening scenes from Episode 6 The Return of the Jedi.

Here’s the full press release, and some other cool stuff that you can find in this latest issue of Blocks Magazine.

NASA Apollo Saturn V and LEGO Star Wars extravaganza in Blocks Issue 35.

It is time to blast off with Blocks Issue 35, with a special NASA Apollo Saturn V build project showing an impressive way to display the latest LEGO Ideas set.

NASA Apollo Saturn V wowed fans when the official version of the LEGO Ideas set was unveiled, so it gets the Blocks deep-dive this month. As well as exclusive launch pad, take-off and moon landing builds, Blocks chats to LEGO designer Carl Merriam about taking on the project, and of course give the set the full review treatment.

Panning the camera down to LEGO Star Wars, the designers of the range explain how they have begun to introduce more playset-based sets such as 75180 Rathtar Escape. Speaking of locations, a unique Pit of Carkoon and Sarlaac build demonstrates how you can recreate the thrilling opening to Return of the Jedi. A selection of images from expert LEGO photographer Vesa Lehtimäki show off the new UCS Snowspeeder as only he can, with the set leading a selection of LEGO Star Wars reviews and appearing on this month’s flip cover.

In Technique, a whole host of ways to harness LEGO horses are demonstrated, and as if there are not enough awesome builds crammed into this month’s Blocks, the definitive 1990s Batmobile gets a LEGO replica to celebrate 25 years of Batman: The Animated Series.

That’s not to mention that this month’s pages also include a report from Billund with a look inside the LEGO House, an interview with the LEGO Star Wars: The Freemaker Adventures showrunners and a look at LEGOLAND California’s new The Force Awakens area in Star Wars Miniland.

To get 112 pages packed with quality LEGO content every month, delivered to your door, subscribe to Blocks magazine at www.blocksmag.com.

 

 

New LEGO Marvel Superheroes 2 Gameplay Trailer Showcased at Gamescon 2017 – PLUS Additional Characters Revealed.

Europe’s Gamescom 2017 is now in full swing, and other than the reveal of the different locations within the world hub of Chronopolis in LEGO Marvel Superheroes 2, one of the highlights of the gaming convention was the reveal of the game’s additional characters. IGN was on the scene together with the creative folks of TT Games to show a brand new gameplay trailer featuring several new Marvel comic book characters. Since its debut a couple of months ago, we have been steadily seeing more and more character reveals of classic and new Marvel superheroes and villains that will smash their way through the game. Here’s IGN’s interview with Phillip Ring (Executive Producer) and Wil Evans (Senior Designer) plus a live demo gameplay to show you around one of LEGO Marvel Superheroes boss battles. Watch this.

In this boss battle video, we see the game’s 7th level which takes place in Asgard and has our heroes pitted against the hellish behemoth, Surtur. What is interesting about this gameplay is that it introduces a new game dynamic were boss battles such as this requires players to make use of their character’s unique abilities on certain specific situations, in order to defeat the level’s boss. The boss’ behavior has also become more challenging since it can modify its attack depending on the player’s behavior as well. For example, if you prefer a melee approach since it could be your character’s strength and advantage, the boss may actually move far away from you. If you prefer the long-range strategy and keeping your enemy at bay, then the boss may actually charge towards you and close that gap. Needless to say, it is a very interesting improvement in Boss Fight AIs.

What is very interesting and probably what most of us wants to know are the new characters added to the roster of the game’s playable characters. As Ring and Evans revealed through the live demo, we have several new minifig characters such as Captain America (Roberta Mendez), Jane Foster as Thor, Maestro,  Greenskyn Smashtroll, Vormund, Carnom, Throg, Tactical Force, and Iron Man (Old West) just to name a few.









We also spotted these never-before-seen LEGO Marvel Superheroes characters in the character selection page, though their respective gameplays were not shown:  Man-Thing, Man-Ape, MODOK, Darkhawk, Heimdall, Hela, Horus, Vision, Kid Colt, Gamora, Forbush Man, Terminatrix, Vulture (Classic), She-Hulk, and Captain America (Pilot). It will really be great to see these digital characters having their physical minifigure counterparts, but who knows, maybe some of them are already in the works.

LEGO Marvel Superheroes 2 are slated to be released in the US on November 14, and November 17 in Europe. It is available for all major gaming platforms including the Xbox One, Playstation 4, Steam (PC) and Nintendo Switch. It comes with a Deluxe Edition that grants you early access to the Classic GOTG Character Pack, Season Pass, and an exclusive Giant-Man minifigure.

 

 

Check Out the Official Images and Building Instructions of the LEGO Architecture LEGO House 21037.

The LEGO House in Billund, Denmark is scheduled to open to the public on September 28, and to commemorate the occasion, LEGO has officially revealed its next Architecture set dedicated to the House of the Brick. Initially listed at the LEGO Architecture website, the latest LEGO Architecture LEGO House (21307) set is a marked improvement of the LEGO House (4000010) which was made available in LEGO Billund stores in 2014. Thanks to Promo Bricks, we now have these official images before it was eventually removed from the LEGO Architecture website.

The LEGO House (21307) is a fairly straightforward build. Its building instructions are available online which you may download right here. See if you have the parts needed to build your own LEGO House using the parts list below as your reference. Save for the printed tile piece that bears the name of the LEGO House, and the exact color of some of the tile pieces, most of its parts are readily available.

As of now, what we do know is that the  LEGO Architecture LEGO House (21307) is exclusively available only at the LEGO House gift shop in Billund, Denmark and will be released to coincide with the opening of the actual LEGO House on September 28. Here’s a rough Google translation of the official product description for the LEGO Architecture LEGO House (21307).

LEGO Architecture LEGO House (21307)

This fascinating model of the LEGO® house stands for creativity and innovation and is a tribute to the most popular building block in the world. This huge experience center in Billund (Denmark) offers lots of activities for the visitors and LEGO fans of all ages and is the perfect place to learn playfully and be captivated by the ultimate LEGO experience. This extremely detailed model perfectly reflects the striking and imaginative architecture of the building. It houses 21 unique, interlocked rooms in LEGO stone form, has transparent facades to flood the entire building with daylight, and has a multi-colored roof, roof terraces and a huge exterior staircase. When you remove the LEGO stone-shaped main axle segment, you get access to the main hall with the grand staircase and the LEGO tree of creativity.